Geunine Fanuc Terminal I/O Basic Module A03B-0823-C011 CNC Servo Motor Driver
FANUC digital input module A03B0823C011
TERMINAL TYPE I/O BASIC MODULE
Ordering specification Name Ordering specification Specification of module Basic module A03B-0823-C001 DI 24pt / DO 16pt With I/O Link I/F Extension module A A03B-0823-C002 DI 24pt / DO 16pt With MPG I/F Note) Connect extension module A next to basic module. Extension module B A03B-0823-C003 DI 24pt / DO 16pt Without MPG I/F Extension module C A03B-0823-C004 DO 16pt, Max 2A/pt 2A output module Spare fuse A03B-0823-K001 2A (for Basic module) Spare terminals set (For Basic module or Extension module A or B) A03B-0823-K010 Terminal block for cable side (T1-T4) Note) Terminal block for cable side is attached with module. This set is for maintenance. Spare terminals set (For extension module C) A03B-0823-K011 Terminal block for cable side (T1,T2) Note) Terminal block for cable side is attached with module. This set is for maintenance. Extension cable A A03B-0823-K100 Length of cable is 100mm. It is necessary to use this cable for using extension module.
| Name | Ordering specification | Specification of module |
| Basic module | A03B-0823-C001 | DI 24pt / DO 16pt With I/O Link I/F |
| Extension module A | A03B-0823-C002 | DI 24pt / DO 16pt With MPG I/F Note) Connect extension module A next to basic module. |
| Extension module B | A03B-0823-C003 | DI 24pt / DO 16pt Without MPG I/F |
| Extension module C | A03B-0823-C004 | DO 16pt, Max 2A/pt 2A output module |
| Spare fuse | A03B-0823-K001 | 2A (for Basic module) |
| Spare terminals set (For Basic module or Extension module A or B) | A03B-0823-K010 | Terminal block for cable side (T1-T4) Note) Terminal block for cable side is attached with module. This set is for maintenance |
| Spare terminals set (For extension module C) | A03B-0823-K011 | Terminal block for cable side (T1,T2) Note) Terminal block for cable side is attached with module. This set is for maintenance. |
| Extension cable A | A03B-0823-K100 | Length of cable is 100mm. It is necessary to use this cable for using extension module. |
The terminal type I/O module have been designed on the assumption that they are housed in closed cabinets. The environmental conditions when installing these cabinets shall conform to the following table. Item Specification Power supply for the control and input circuits 24VDC±10% Ambient temperature In operation:0~55ºC In storage or transportation:-20~60ºC Variations in temperature Up to 1.1ºC per minute Humidity General condition : 75% or lower (relative humidity) Short–period condition (up to one month) : Up to 95% Vibration 0.5G or less (Operating), 1.0G or less (Non-operating) FANUC conducted an evaluation test under the following conditions: 10 to 58 Hz: 0.075 mm (amplitude) 58 to 500Hz: 1G Direction of vibration: Each of the X, Y, and Z directions Number of sweep cycles: 10 Conforming to IEC68-2-6 Environment Normal machine shop environment (The environment must be considered if the cabinets are in a location where the density of dust, coolant, organic solvent, and/or corrosive gas is relatively high.)
Why choose us?
1. Best price and large stock
2. Clients from USA, Europe, Mexico, Pakistan,Singpore, etc. purchase large quantity
3. Good service and One year warranty
4. Our company has good resources in china, and we have good partners.
5. Our company try to solve all problem for you regards product.
7. Fast response and professional answer.
8. Welcome to contact us for cooperation!
Product Tags:
|
|
VDE CNC Servo Motor Driver Fanuc Terminal I/O Basic Module A03B-0823-C011 Images
|
